top of page
1цу1_edited.png

Passive Shelter Antenna Set for Emergency Communication in Protected Facilities

Aug 24
5 min read
#PassiveShelterAntenna #ShelterAntenna #EmergencyCommunication #CivilDefense #CivilDefence #ShelterCommunication #BunkerCommunication #EmergencyCommunications #PassiveRepeater #5GAntenna #5GCommunication #MobileNetwork #RadioCommunication #ProtectedFacilities #CivilDefenseShelter #EmergencyShelter #HardenedFacilities #UndergroundShelter #ShelterEquipment #CommunicationSystems #CriticalCommunications #EmergencyPreparedness #ShelterTechnology #BunkerEquipment #SafetySystems

The Passive Shelter Antenna Set is a passive communication solution designed to help maintain radio and mobile-network connectivity in civil defence shelters, underground or hardened facilities, and other structures where concrete walls, metal construction or surrounding ground can make signal transmission difficult.

According to the published product information, the system is designed to receive and reproduce radio and mobile-phone signals between the outside environment and the shelter without connection to an electrical power source. SHELTER


Passive communication without an external power supply

The principal feature of the system is its passive operating principle. The product description states that the antenna does not require an electrical power source and can therefore operate when the electrical grid is unavailable. SHELTER

The system is intended to transfer signals between an external antenna and an antenna located inside the protected facility. The published set includes:

  • internal antenna;

  • external antenna;

  • 30 m connecting cable with connector. SHELTER

The antenna system therefore provides a physical signal path between the outside and inside of the protected structure without requiring an active powered repeater.


Application in shelters and hardened facilities

The product is specifically described for use in civil defence shelters, underground/hardened facilities and other environments where signals may have difficulty passing through walls, metal structures or surrounding ground. SHELTER

Maintaining communication in such environments can be important for receiving information and communicating with external services. The product description specifically identifies applications including communication with rescue authorities, sending emergency messages and receiving instructions. SHELTER

The antenna should therefore be considered a communication component for a protected facility rather than an independent radio or mobile communication device.


Internal antenna

The internal antenna is identified as model VSS-5G-SAS-1-SMAN.

The published technical documentation specifies the following characteristics:

Parameter

Specification

Frequency range

698–960 / 1710–2700 / 3400–3800 MHz

Gain

>6 dBi / >9 dBi / 6 dBi

VSWR

≤2.0

Polarization

Vertical

Horizontal beamwidth

65°

Vertical beamwidth

55°

Input impedance

50 Ω

Maximum power

100 W

Lightning protection

DC Ground

Connector

SMA-Female, 1 m cable

Mounting

Wall mount

Dimensions

165 × 155 × 50 mm

Weight

0.3 kg

Reflector material

Copper

Radome material

ABS

Radome colour

White

Relative humidity

Up to 100%

Operating temperature

−40°C to +60°C

These specifications are provided in the published technical documentation for the VSS-5G-SAS-1-SMAN antenna. Odit Construction Company


External antenna

The external antenna is identified as model VSS-5G-UAY-1-NN.

Its published specifications include:

Parameter

Specification

Frequency range

698–960 / 1710–2700 / 3400–3800 MHz

Gain

4 dBi / 4 dBi / 3 dBi

VSWR

≤2.0

Polarization

Vertical

Horizontal beamwidth

360°

Vertical beamwidth

60°

Input impedance

50 Ω

Maximum power

50 W

Lightning protection

DC Ground

Connector

N-Female, 1 m cable

Mounting

Mast mount

Dimensions

190 × 66 × 66 mm

Weight

0.37 kg

Reflector material

Brass

Radome material

UV-ABS

Radome colour

White

Maximum wind speed

216 km/h

Operating temperature

−40°C to +60°C

These specifications are documented for the VSS-5G-UAY-1-NN external antenna. Laatuantenni


Frequency coverage

Both antenna components are specified for the following frequency ranges:

698–960 MHz1710–2700 MHz3400–3800 MHz

This range covers the frequency bands specified for the antenna system, including portions of cellular and 5G frequency ranges. The technical documentation should be used when determining compatibility with a particular operator or communication system. Laatuantenni

The Finnish antenna catalogue also presents the two antenna models together as a passive shelter solution, with the external omnidirectional antenna connected to the internal panel antenna through the cable. Kesko Onninen


Omnidirectional external antenna

The external VSS-5G-UAY-1-NN antenna has a specified 360° horizontal beamwidth. This means the published antenna specification describes horizontal omnidirectional coverage.

The internal VSS-5G-SAS-1-SMAN antenna is a directional panel antenna with a specified 65° horizontal and 55° vertical beamwidth. Laatuantenni

The different antenna characteristics correspond to their respective positions in the system: an external antenna receives/transmits signals outside the protected structure, while the internal panel antenna provides the indoor interface.


No electrical power required

One of the main characteristics of the Passive Shelter Antenna Set is that it does not require an electrical power supply. The product page specifically states that the system can work when the power grid is unavailable. SHELTER

This differentiates a passive antenna system from an active signal repeater that requires electrical power for amplification.

The passive system itself does not generate or amplify a signal. Its function is based on the antenna and cable arrangement connecting the external and internal environments.


Testing and certification

The product information states that the antennas have undergone various tests and have certification for use in civil defence shelters in Finland. SHELTER

The published description also states that the equipment has undergone testing including a vibration test representing vibration caused by an outdoor explosion transmitted through the concrete structure of a shelter to equipment attached to that structure. SHELTER

The stated purpose of these tests is to verify that civil-protection equipment can function during crisis conditions.


System configuration

The complete Passive Shelter Antenna Set consists of:

External antenna → 30 m connecting cable → internal antenna

The product page specifies that the set includes the internal and external antennas together with a 30 m cable and connector. SHELTER

The technical documentation also notes that the specification for the VSS-5G-SAS-1-SMAN document describes the indoor antenna and that an external antenna and connecting cable are required for operation of the system. Odit Construction Company


Main technical characteristics

Specification

Passive Shelter Antenna Set

System type

Passive shelter antenna / repeater

Internal antenna

VSS-5G-SAS-1-SMAN

External antenna

VSS-5G-UAY-1-NN

Frequency range

698–960 / 1710–2700 / 3400–3800 MHz

Internal antenna gain

>6 / >9 / 6 dBi

External antenna gain

4 / 4 / 3 dBi

Internal antenna impedance

50 Ω

External antenna impedance

50 Ω

Internal antenna maximum power

100 W

External antenna maximum power

50 W

Cable included

30 m

Power supply required

No

Price shown

€855 excluding sales tax

The product page currently lists the Passive Shelter Antenna Set at €855 excluding sales tax. SHELTER


Conclusion

The Passive Shelter Antenna Set is a passive communication solution designed for protected environments where conventional radio and mobile signals may be attenuated by concrete, metal structures or surrounding ground.

The system consists of an internal panel antenna, external antenna and 30 m connecting cable and operates without an electrical power source. Its published frequency range is 698–960 / 1710–2700 / 3400–3800 MHz, with separate technical characteristics for the internal and external antennas. SHELTER

The published product information also states that the equipment has been tested and approved for civil defence shelters in Finland, including vibration testing relevant to equipment installed on shelter structures. SHELTER



 
 
 

Comments


bottom of page